B&R

80CM040012601Motor cable, length 4 m, 5x 0.34 mm², 4-pin male Molex connector on the motor side, M12 connector on the drive side, can be used in cable drag chains, UL listed

80CM040032601Incremental encoder cable, length 4 m, 5x 0.34 mm², 8-pin male Molex connector on the motor side, M12 connector on the drive side, can be used in cable drag chains, UL listed

80CM050012101MOTOR CABLE5 X 0.75 MM5 M LENGTH4 PIN CONNECTORFLEX

80CM050012601Motor cable, length 5 m, 5x 0.34 mm², 4-pin male Molex connector on the motor side, M12 connector on the drive side, can be used in cable drag chains, UL listed

80CM050016101

80CM050022101

80CM050032501Incremental encoder cable, length 5 m, 4x 0.14 mm², 2x 0.35 mm², 8-pin connector on the motor side, 9-pin DSUB connector on the drive side

80CM050032601Incremental encoder cable, length 5 m, 5x 0.34 mm², 8-pin male Molex connector on the motor side, M12 connector on the drive side, can be used in cable drag chains, UL listed

80CM050042501

80CM050056501HIPERFACE encoder cable, length 5 m, 5x 2x 0.14 mm², 2x 0.5 mm², series 615 signal connector on the motor side, 9-pin DSUB connector on the drive side

80CM050132101HYBRID CABLE5 METER LENGTHFOR STEPPER MOTORS WITH IP20 INCREMENTAL ENCODER4-PIN AND 8-PIN CONNECTORS ON THE MOTOR SIDE

80CM050167701

80CM050168701

80CM054012601Motor cable, length 5.4 m, 5x 0.34 mm², 4-pin male Molex connector on the motor side, M12 connector on the drive side, can be used in cable drag chains, UL listed

80CM054032601Incremental encoder cable, length 5.4 m, 5x 0.34 mm², 8-pin male Molex connector on the motor side, M12 connector on the drive side, can be used in cable drag chains, UL listed

80CM050032501Incremental encoder cable, length 5 m, 4x 0.14 mm², 2x 0.35 mm², 8-pin connector on the motor side, 9-pin DSUB connector on the drive side

80CM100012101

80CM100012601Motor cable, length 10 m, 5x 0.34 mm², 4-pin male Molex connector on the motor side, M12 connector on the drive side, can be used in cable drag chains, UL listed

80CM100016101

80CM100022101

80CM100032501Incremental encoder cable, length 10 m, 4x 0.14 mm², 2x 0.35 mm², 8-pin connector on the motor side, 9-pin DSUB connector on the drive side

80CM100032601Incremental encoder cable, length 10 m, 5x 0.34 mm², 8-pin male Molex connector on the motor side, M12 connector on the drive side, can be used in cable drag chains, UL listed

80CM100042501

80CM100056501HIPERFACE encoder cable, length 10 m, 5x 2x 0.14 mm², 2x 0.5 mm², series 615 signal connector on the motor side, 9-pin DSUB connector on the drive side

80CM100132101Hybrid cable, length 10 m, 4x 0.5 mm², 2x 0.35 mm², 3x 0.14 mm², for stepper motors with IP20 incremental encoder, 4-pin and 8-pin connectors on the motor side

80CM100167701

80CM100168701

80CM150012101

80CM150016101

80CM150022101

80CM150032501

80CM150042501

80CM150056501HIPERFACE encoder cable, length 15 m, 5x 2x 0.14 mm², 2x 0.5 mm², series 615 signal connector on the motor side, 9-pin DSUB connector on the drive side

80CM150132101Hybrid cable, length 15 m, 4x 0.5 mm², 2x 0.35 mm², 3x 0.14 mm², for stepper motors with IP20 incremental encoder, 4-pin and 8-pin connectors on the motor side, can be used in cable drag chains, UL listed

80CM150167701

80CM150168701

80CM200012101

80CM200016101

80CM200022101

80CM200032501

80CM200042501

80CM200056501HIPERFACE encoder cable, length 20 m, 5x 2x 0.14 mm², 2x 0.5 mm², series 615 signal connector on the motor side, 9-pin DSUB connector on the drive side

80CM200167701

80CM200168701

80CM250012101

80CM250032501

80CM250132101Hybrid cable, length 25 m, 4x 0.5 mm², 2x 0.35 mm², 3x 0.14 mm², for stepper motors with IP20 incremental encoder, 4-pin and 8-pin connectors on the motor side, can be used in cable drag chains, UL listed

80MPD1300S000012-phase hybrid stepper motor, 56.4 mm flange, length 45 mm, 3 A serial / 6 A parallel, 1.1 Nm holding torque, 0.8 Nm stall torque

80MPD1300S014012 PHASE HYBRID STEPPER MONITOR 56.4 MM FLANGE LENGH 66MM ABR 24 VDC, 3 A SERIES 1.1 NN HOLDING TORGUE, 0.8 NM STALL TORGUE

80MPD1600S014012-phase hybrid stepper motor, 56.4 mm flange, length 66 mm, ABR 24 VDC, 6 A parallel, 1.1 Nm holding torque, 0.8 Nm stall torque